AT238P

جهاز الرفع الهوائي المفصلي المتداخل

Altec's AT Series has proven to be the most popular and versatile aerial devices in the marketplace. The AT238P has several features that aid operators in the cable placing process. Some of them include, a two way communication from the platform to cab and an adjustable fork arm mounted pulling eye.

General Specifications:
Ground to Bottom of Platform*: 38 ft (11.6 m)
Maximum Side Reach: 26.5 ft (8.1 m)
Boom Articulation (Lower Boom): -25 to 75°
Rotation: 370° غير مستمر
تحميل ورقة المواصفات
Standard Features:
  • Telescopic Articulating Non-Insulating Aerial Device
  • Dual Boom Tip Receiver for Pulling Eye/ Fairlead Assembly
  • Enhanced Two-Way Voice Communication System from Platform to Cab
  • Hydraulically Extended Boom
  • Push-Button Pendant Lower Controls
  • Turntable Mounted Boom Rest
  • End-mounted Steel Placer Platform 29 x 30 x 42 in (736.6 x 762 x 1066.8 mm) Nominal
  • التحكم في ارتفاع المنصة الهيدروليكية آليًا
  • Platform Capacity to 400 lb (181 kg)
  • Engine Start/Stop at Upper and Lower Controls
  • Manual Lowering Valve
  • Protected Hydraulic Tank Internally Mounted to Formed Pedestal
  • 120 VAC Circuit in Boom With GFI Outlet at the Platform
  • Single Handle Proportional Controls
Optional Features:
  • نظام تخزين ثانوي
  • Fork Arms Equipped with Adjustable Pinning Positions for Pulling Eye/Fairlead
  • Platform Tool Trays
  • Camera system on booms for wide-angle operator and work zone monitoring and at rear for back-up and parking assistance
Recommended Features:
  • نظام الحماية من السقوط
  • حواجز العجلات

*Based on chassis frame height of 40 inches (1016 mm)

Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation. Altec provides custom options in countries throughout the world. Please contact Altec Worldwide for the options available in your country.